Grandstream GXP2130: Difference between revisions

From MiRTA PBX documentation
Jump to navigation Jump to search
(Created page with "This is an executive phone compatible with the predefined “Grandstream GXP” template. Log into the phone interface 400px Locate the Upgrade and Provis...")
 
No edit summary
 
Line 3: Line 3:
Log into the phone interface
Log into the phone interface


[[gxp2130-1.png|400px]]
[[File:gxp2130-1.png|400px]]


Locate the Upgrade and Provisioning menu
Locate the Upgrade and Provisioning menu


[[gxp2130-2.png|400px]]
[[File:gxp2130-2.png|400px]]


Configure as shown below
Configure as shown below


[[gxp2130-3.png|400px]]
[[File:gxp2130-3.png|400px]]


In detail, select Upgrade via “HTTPS”, clean Firmware Server Path if not used, enter the Config Server Path as shown on the Configuration/Provisioning/Phones page, in this example:
In detail, select Upgrade via “HTTPS”, clean Firmware Server Path if not used, enter the Config Server Path as shown on the Configuration/Provisioning/Phones page, in this example:

Latest revision as of 19:33, 12 October 2016

This is an executive phone compatible with the predefined “Grandstream GXP” template.

Log into the phone interface

Gxp2130-1.png

Locate the Upgrade and Provisioning menu

Gxp2130-2.png

Configure as shown below

Gxp2130-3.png

In detail, select Upgrade via “HTTPS”, clean Firmware Server Path if not used, enter the Config Server Path as shown on the Configuration/Provisioning/Phones page, in this example: demo.mirtapbx.com/mirtapbx/autoprovision/RuLPYWuESutnFCtc/ Do not enter the protocol! Set the DHCP options to No if not used, save and apply. Reboot your phone.