Installing MiRTA PBX

From MiRTA PBX documentation
Revision as of 15:43, 2 August 2016 by Admin (talk | contribs) (Created page with "Installing MiRTA PBX is not a piece of cake and the automatic installer has been proven only on CentOS 6 64bit. Even with the automatic installer, a series of manual steps are...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Installing MiRTA PBX is not a piece of cake and the automatic installer has been proven only on CentOS 6 64bit. Even with the automatic installer, a series of manual steps are required.

  • Copy the installer script from pbx/protected/installMirtaPBX.sh to /usr/local/src in your new server
  • Move to /usr/local/src
  • Edit it and check the version, set to 6
  • Check your hostname, change to something more useful if you have set to localhost
  • Upgrade the Kernel by running
./installMirtaPBX.sh Kernel
  • Reboot the server to be sure to have the latest kernel running
  • Move again to /usr/local/src
  • Install the system by running
./installMirtaPBX.sh