Upgrading kernel: Difference between revisions

From MiRTA PBX documentation
Jump to navigation Jump to search
No edit summary
No edit summary
Line 15: Line 15:
Activate the new repo "elrepo-kernel" and then install the kernel-lt and kernel-lt-devel
Activate the new repo "elrepo-kernel" and then install the kernel-lt and kernel-lt-devel


= Upgrading Kernel modules =
== Upgrading Kernel modules ==


If you are upgrading the kernel from 2.6 to 4.4, the GeoIP module requested is different. In this case, once the server restarts, the GeoIP module will fail to start and you may be locked out of your server. It can be a good idea to disable GeoIP support before performing the upgrade and then recompile the right module and then activate back GeoIP.
If you are upgrading the kernel from 2.6 to 4.4, the GeoIP module requested is different. In this case, once the server restarts, the GeoIP module will fail to start and you may be locked out of your server. It can be a good idea to disable GeoIP support before performing the upgrade and then recompile the right module and then activate back GeoIP.
Line 22: Line 22:


   cd /usr/local/src   
   cd /usr/local/src   
  \rm -r xtables*
   wget http://devel.mirtapbx.com/mirtapbx_support/xtables-addons-2.10.tar.xz
   wget http://devel.mirtapbx.com/mirtapbx_support/xtables-addons-2.10.tar.xz
   tar xvf xtables-addons-2.10.tar.xz
   tar xvf xtables-addons-2.10.tar.xz
Line 31: Line 32:
Dahdi module instead, is fully compatible between kernel versions
Dahdi module instead, is fully compatible between kernel versions


= Updating Kernel modules =
== Updating Kernel modules ==


MiRTA PBX relies on two kernel modules, geoip and dahdi. The first allows to filter packets based on the geographical location, so you can avoid receiving call attempts from foreign countries, the second make conferences to work. When the kernel is upgraded, during a normal CentOS upgrade, these kernel modules will be not automatically regenerated for the new kernel. In this case, you need to reboot the server into new kernel and recompile both.
MiRTA PBX relies on two kernel modules, geoip and dahdi. The first allows to filter packets based on the geographical location, so you can avoid receiving call attempts from foreign countries, the second make conferences to work. When the kernel is upgraded, during a normal CentOS upgrade, these kernel modules will be not automatically regenerated for the new kernel. In this case, you need to reboot the server into new kernel and recompile both.

Revision as of 15:06, 27 April 2019

MiRTA PBX is used to run on CentOS 6 or 7, 64bit.

Most modern servers have features that are working not optimal with the stock kernels. This is especially true for CentOS 6, having problems with large memory servers. To avoid these problems, it is possible to upgrade safely the servers to the latest stable Kernel 4.

Download the signature for repository Elrepo

rpm --import https://www.elrepo.org/RPM-GPG-KEY-elrepo.org

Download the repo package:

For CentOS 6:

rpm -Uvh https://www.elrepo.org/elrepo-release-6-8.el6.elrepo.noarch.rpm

For CentOS 7:

rpm -Uvh https://www.elrepo.org/elrepo-release-7.0-3.el7.elrepo.noarch.rpm

Activate the new repo "elrepo-kernel" and then install the kernel-lt and kernel-lt-devel

Upgrading Kernel modules

If you are upgrading the kernel from 2.6 to 4.4, the GeoIP module requested is different. In this case, once the server restarts, the GeoIP module will fail to start and you may be locked out of your server. It can be a good idea to disable GeoIP support before performing the upgrade and then recompile the right module and then activate back GeoIP.

If you are moving from kernel 2.6 to 4.4, once running kernel 4.4 perform the following steps:

 cd /usr/local/src  
 \rm -r xtables*
 wget http://devel.mirtapbx.com/mirtapbx_support/xtables-addons-2.10.tar.xz
 tar xvf xtables-addons-2.10.tar.xz
 cd xtables-addons-2.10
 wget http://devel.mirtapbx.com/mirtapbx_support/mconfig_1.37
 mv mconfig_1.37 mconfig
 ./configure ; make ; make install

Dahdi module instead, is fully compatible between kernel versions

Updating Kernel modules

MiRTA PBX relies on two kernel modules, geoip and dahdi. The first allows to filter packets based on the geographical location, so you can avoid receiving call attempts from foreign countries, the second make conferences to work. When the kernel is upgraded, during a normal CentOS upgrade, these kernel modules will be not automatically regenerated for the new kernel. In this case, you need to reboot the server into new kernel and recompile both.

Recompiling dahdi

Dahdi installation directory is in /usr/local/src, so it will be enough to run:

cd /usr/local/src/dahdi*
make
make install
service dahdi restart

Recompiling geoip

GeoIP installation directory is in /usr/local/src, so it will be enough to run:

cd /usr/local/src/xtables*
./configure
make
make install