Configuring BLF on Cisco SPA: Difference between revisions

From MiRTA PBX documentation
Jump to navigation Jump to search
(Created page with "Cisco SPA can be tricky even for basic configurations. In this case, we use a Cisco SPA504G to configure BLF for some phones. # Open the phone administration in your browser....")
 
No edit summary
 
Line 12: Line 12:


fnc=blf+sd+cp;sub=104-DEVEL@$PROXY
fnc=blf+sd+cp;sub=104-DEVEL@$PROXY
For the direct pickup to work, you need to specify the feature code you have chosen in the "Attendant Console Call Pickup Code". Use something like *56# if you have specified *56[EXT] as Direct Pickup Code in MiRTA PBX

Latest revision as of 10:13, 15 September 2019

Cisco SPA can be tricky even for basic configurations. In this case, we use a Cisco SPA504G to configure BLF for some phones.

  1. Open the phone administration in your browser.
  2. Login as administrator and open advanced configuration.
  3. Select the "Attendant Console” screen.

It is important to set "Asterisk" for the server type:

Spa504gblf.png

In the BLF key section, to monitor extension 104 in tenant DEVEL, use a string like:

fnc=blf+sd+cp;sub=104-DEVEL@$PROXY

For the direct pickup to work, you need to specify the feature code you have chosen in the "Attendant Console Call Pickup Code". Use something like *56# if you have specified *56[EXT] as Direct Pickup Code in MiRTA PBX