Enabling WebRTC

From MiRTA PBX documentation
Revision as of 09:48, 4 February 2018 by Admin (talk | contribs)
Jump to navigation Jump to search

WebRTC is not enabled by default and you need to follow carefully the following steps to make it work.

  • Install an SSL certificate on Asterisk. This needs to be a real SSL certificate. Check the Asterisk FAQ on how to install an SSL Certificate in Asterisk
  • Install the Opus codec and add to the web interface. You can check the instructions in the Setup Guides section Installing OPUS codec
  • Activate the http daemon for asterisk by editing the http.conf file as following:
[general]
enabled=yes
bindaddr=0.0.0.0
bindport=8088
tlsenable=yes
tlsbindaddr=0.0.0.0:8089
tlscertfile=/etc/asterisk/certificates/demo.mirtapbx.com.pem

The tlscertfile needs to point to your certificate in pem format

  • Activate the ws and wss transport in sip.conf, set the realm
transport=udp,tls,ws,wss
realm=demo.mirtapbx.com
  • Set the path for your certificate in the Web interface - Admin/Settings, Security section, WebRTC SSL path field
  • In your extension enable Opus Codec, RTP Encryption and Any Transport
Retrieved from "http://www.mirtapbx.com/manual/index.php?title=Enabling_WebRTC&oldid=1202"