Configuring BLF on Cisco SPA: Difference between revisions

From MiRTA PBX documentation
Jump to navigation Jump to search
Created page with "Cisco SPA can be tricky even for basic configurations. In this case, we use a Cisco SPA504G to configure BLF for some phones. # Open the phone administration in your browser...."
 
No edit summary
 
Line 12: Line 12:


fnc=blf+sd+cp;sub=104-DEVEL@$PROXY
fnc=blf+sd+cp;sub=104-DEVEL@$PROXY
For the direct pickup to work, you need to specify the feature code you have chosen in the "Attendant Console Call Pickup Code". Use something like *56# if you have specified *56[EXT] as Direct Pickup Code in MiRTA PBX

Latest revision as of 14:13, 15 September 2019

Cisco SPA can be tricky even for basic configurations. In this case, we use a Cisco SPA504G to configure BLF for some phones.

  1. Open the phone administration in your browser.
  2. Login as administrator and open advanced configuration.
  3. Select the "Attendant Consoleā€ screen.

It is important to set "Asterisk" for the server type:

In the BLF key section, to monitor extension 104 in tenant DEVEL, use a string like:

fnc=blf+sd+cp;sub=104-DEVEL@$PROXY

For the direct pickup to work, you need to specify the feature code you have chosen in the "Attendant Console Call Pickup Code". Use something like *56# if you have specified *56[EXT] as Direct Pickup Code in MiRTA PBX