Feature Codes

From MiRTA PBX documentation
Revision as of 09:50, 24 December 2016 by Admin (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Feature Codes are the keys to access any aspect of the PBX, trigger special features or just performs tricky operations.

Feature codes can start with the * (star) or with the # (sharp) (but you can also configure to allow pure numeric feature codes) and can be associated to a number of actions from any of the possible destinations.

When requested, the special string [NUM] and [EXT] can be used in the feature code. The [NUM] will be replaced with the number dialed. For example, if a feature code is set to *62[NUM] for “Mask the callerid on calling [NUM]” then if the number *625558764 is dialed, then the [NUM] is assigned to the number 5558764.

Maskcalleridcallingnum.png

The [EXT] instead will be replaced with an extension number. If a feature code is set to *8[EXT] to Pickup Extension [EXT] and you have defined extension 100, then dialing *8100, the extension 100 will be picked up.

Pickupringingextension.png

Feature code *1 is reserved (due to asterisk limitation) to enable/disable recordings.

Retrieved from "http://www.mirtapbx.com/manual/index.php?title=Feature_Codes&oldid=790"