Configuring BLF on Cisco SPA

From MiRTA PBX documentation
Revision as of 14:13, 15 September 2019 by Admin (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Cisco SPA can be tricky even for basic configurations. In this case, we use a Cisco SPA504G to configure BLF for some phones.

  1. Open the phone administration in your browser.
  2. Login as administrator and open advanced configuration.
  3. Select the "Attendant Console” screen.

It is important to set "Asterisk" for the server type:

Spa504gblf.png

In the BLF key section, to monitor extension 104 in tenant DEVEL, use a string like:

fnc=blf+sd+cp;sub=104-DEVEL@$PROXY

For the direct pickup to work, you need to specify the feature code you have chosen in the "Attendant Console Call Pickup Code". Use something like *56# if you have specified *56[EXT] as Direct Pickup Code in MiRTA PBX